<dd id="aottz"></dd> <th id="aottz"></th>

      1. <em id="aottz"></em><dd id="aottz"><pre id="aottz"></pre></dd>
        <th id="aottz"></th>
        <dd id="aottz"><noscript id="aottz"></noscript></dd><em id="aottz"><acronym id="aottz"><u id="aottz"></u></acronym></em>
        1. Welcome to iValve, a professional manufacturer for water control system

          Gland Type Gate Valve


          image.png

          Features and applications

          By rotating the handwheel/square cap drive valve stem to do the lifting movement, the use of all rubber wrapped valve disc to produce the right amount of elastic deformation, and the valve body seat, to achieve excellent sealing effect.





          Design EN 1171
          Flange? EN 1092-2
          Face to Face
          EN558-1 Series3/14/15
          Tests EN 12266-1
          Operation
          Handwheel / Cap
          Medium
          Water
          Temperature 0-80℃
          Seal test
          11/18/28Bar
          Body test 15/24/38Bar
          PN
          10/16/25Bar
          DN DN40-DN800


          Design features


          Gland: there are 5 O-rings in the upper seal. The two O-rings on the pressure ring can be replaced under the open state of the disc. Copper thrust ring, increase sealing and service life. Water line design, increase the sealing, can be made according to customer requirements.


          Disc: linear sealing, reduce operating torque, improve sealing performance; The A point of the valve disc, the company combined with years of practical experience, innovative design of the waist of the valve disc A point, plane to avoid excessive contact with the valve body under strong pressure, so as to avoid the conventional valve is prone to encounter the valve disc damage, iron exposure, rust and other problems, greatly improving the service life of the valve.


          Technical Data

          1629187176(1).jpg

          1629187250(1).jpg1629187316(1).jpg


          1629187284(1).jpg




          Attention:

          1.The valve is installed independent of the flow direction of the medium.

          2.?After the valve is assembled, the thread of the bolt/stem shall be greased to prevent corrosion and facilitate subsequent disassembly.

          3.?Do not use the valve for pipe pressure regulation, gate valves generally play the role of a switch, to achieve a good adjustment effect, it is recommended to choose a professional regulating valve, water erosion will affect the service life of the valve disc.

          4.?Do not use valves with EDPM for gaseous fluids.


          Installation instructions

          1.?Notice of water stop shall be issued before construction.

          2.?The water in the road should be avoided in the front row of construction.

          3.?Electricity for construction must be guaranteed.

          4.?It is strictly prohibited to use hand wheel, handle and transmission mechanism for hoisting and collision is strictly prohibited.

          5.?Lubricate the valve at least once a month if it is in frequent use.

          大香伊蕉在人线国产av_久久中文精品无码中文字幕_我的公强要了我高潮bd_污污污爽爽爽的污网站